Additional equipment Gaze'lektronika Modems, indicators, etc.

Modems

• Modems are used to transmit data from gas volume correctors EK270, EK260, EK88/K, TS215, TS-90/T, (TS-90/J) to a personal computer via a telephone network, a dedicated line or a GSM network.

---

Adapter cables (KA/K, KA/O, KA/O-USB,KA/M, KA/N)

• They are used to connect gas volume correctors to a personal computer.

---

The software-hardware complex for reading and analyzing data of electronic correctors AS-300 is designed for reading, processing and analyzing data from archives of electronic correctors EK270, EK260, EK-88/K, EK-87, TS-90/T, TS-90/K, TS210, TC215. Communication with the correctors is established locally or remotely (modem connection). The number of correctors processed is not limited.

---

The MP260 functional expansion module is designed to be used in conjunction with the EK270 or EK260 gas volume corrector and performs switching (connection) of two devices with an RS232 interface to the EC270 (EK260) permanent connection interface (wired interface). Only one of the connected (external, in relation to EC270 and EC260) devices can be active at a time. The communication session is initiated by an external device.

---

The MP270 functional expansion module is designed to be used in conjunction with the gas volume corrector EK270, EK280, EK290 and EK260 and performs switching (connection) of two devices with an RS232 interface to the permanent connection interface (wired interface) of the corrector.

---

Indicators of differential pressure IPD. The indicators are mounted on gas filters used to filter hydrocarbon and other non-aggressive gases from mechanical impurities, at an operating pressure of the filtered gas from 0 to 1.6 MPa, in the temperature range of the filtered gas from minus 40 ° C to plus 70 ° C. The indicators are designed to monitor the nature of the change in the pressure drop on the gas filters. The pressure drop, in this case, characterizes the degree of clogging of the gas filters.

---